- Energy source—Type of energy source used for generation
- Total output power of energy—Amount of energy in kW outputted from PV panels
- Details of inverter—Provide whether the inverter used is single or three phase
- Certificate of suitability is required for given inverter
- Continuous rated output in kW of inverter is required
- Make and model of inverter is required
- Details of existing generation system—Details of energy output of current PV panels and current inverter
- Standby generator—Break-before-make generators break contact with one source of power before making contact with another, close transfer trip generators make contact with a second source of power before breaking contact with the first
The above diagrams and information need to be attached to application when relevant.
- Location sketch/diagram showing the generation system connection point—Diagram of system showing where the connection point to the grid is located
- Single phase to earth fault level contribution details—Details of the single phase connected to earth, may include current and earth fault impedances
- Single Line Diagram of the electrical installation—Diagram mapping circuitry involved in the electrical installation
- Generation system details for non-inverter generation system—Only applies to systems with no inverter used, details of generation system
- Voltage measurement and calculations—Calculations of voltage and power used in generation system
- Other—Other documents that are applicable to application process